7
About The Meter
2
2.4 FRONT OF THE METER(Continued)
MENU
Button
In the Run Mode, press the
MENU
button to terminate the current measuring process
and enter you into the Configuration Mode.
Only if you have not installed the lockout jumpers on the main board.
In the Configuration Mode, press the
MENU
button to store changes in the nonvolatile
memory and then advance you to the next menu item.
RESET
Button
If you hard reset (press the
MENU
button followed by the
RESET
button) or power off/on
the meter, it shows
RST
, followed by
PROC
.
In the Run Mode, press the
RESET
button to reset tare, if any. The meter shows
T.RST
and returns to the Run Mode.
In the Configuration Mode, press the
RESET
button once to review the previous menu.
Press the
RESET
button twice to perform a hard reset and return to the Run Mode.
In the Peak Mode, press the
RESET
button to reset peak values. The meter shows
PK.RS
and returns to the Run Mode.
In the Setpoint Mode, press the
RESET
button to reset the latched setpoint. The meter
shows
SP.RS
and enters the Run Mode.
When in setpoint or Configuration Mode, if the meter shows 9999 or -1999
with all flashing digits, the value has overflowed. Press the
/MAX
button
to start a new value.
Note
☞
Note
☞
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
