background image

Page 33

Feature #12

    Doors Lock With Last Door Arming

       

(Factory Default Setting Off)

This feature adds the automatic locking of the doors to feature #4, Last Door

Arming.  If this feature is turned on, the doors will lock when the system becomes
armed 30 seconds after closing the last door.  Feature #4 must be turned on for
this feature to operate.

Programming Doors Lock With Last Door Arming:

Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and

released twelve times.  The system’s response will be twelve siren chirps, and the
Status Light flashing twelve times, pausing, then repeating.  Within 10 seconds,
press and release the transmitter/transceiver’s "Arm/Lock" button to turn on the
Doors Lock With Last Door Arming feature (the siren will chirp once) or the
"Disarm/Unlock" button to turn off the feature (the siren will chirp twice).

Status Light flashing ten times, pausing, then repeating.  Within 10 seconds, press
and release the transmitter/transceiver’s "Arm/Lock" button to turn on “Unlock
#2 When Ignition Turned Off” (the siren will chirp once) or the "Disarm/Unlock"
button to turn this feature off (the siren will chirp twice).

Feature #13

    Doors Lock With Automatic Rearm

  

    (Factory Default Setting  Off)

This feature adds the automatic locking of the doors to feature #5, Automatic

Rearming.  If this feature is turned on, the doors will lock when the system rearms
itself 90 seconds after being disarmed by the transmitter.  Feature #5 must be
turned on for this feature to operate.

Feature #11

         Open Door Bypass Of Ignition Locking

 

    (Factory Default Setting  On)

This feature cancels the automatic locking or unlocking of the vehicle’s doors

when the ignition switch is turned on or off if one of the doors is open.
This feature can be useful, for example, for leaving others within a locked vehicle
when only the driver exits the vehicle.  Features #8, #9, or #10 must be turned on
for this feature to operate.

Programming Open Door Bypass Of Ignition Locking:

Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and

released eleven times.  The system’s response will be eleven siren chirps, and the
Status Light flashing eleven times, pausing, then repeating.  Within 10 seconds,
press and release the transmitter/transceiver’s "Arm/Lock" button to turn on
“Open Door Bypass Of Ignition Locking” (the siren will chirp once) or the
"Disarm/Unlock" button to turn this feature off (the siren will chirp twice).

* An optional doorlock

interface must be

installed.  When

Auxiliary #2 is operated,

all of the doors will

unlock, even if the

vehicle is configured

with Driver’s Door

Priority.

To Activate Auxiliary Output #2:

Press & Hold for 3 Seconds the “Auxiliary #2 Output” Button ( II )

To Activate Auxiliary Output #3:

Press & Hold for 3 Seconds the “Auxiliary Output #3” Button ( III )

Page 16

 

Hold 3

seconds

CAN OPERATE OTHER
 OPTIONAL EQUIPMENT,

       ON OR OFF THE

VEHICLE

CAN OPERATE OPTIONAL

WINDOW ROLL-UPS

EXAMPLES:

TYPICALLY USED

FOR OPTIONAL

TRUNK

RELEASE

IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
FLASH

IF THE SYSTEM IS NOT ARMED,

CONFIRMATION IS 1 SIREN CHIRP

AND 1 LIGHT FLASH

 Hold 3
seconds

 

Hold 3

seconds

THE DOORS WILL UNLOCK*

Auxiliary Output Notes:

• Auxiliary #2 output may be activated anytime, provided the vehicle’s igni-

tion is off.  While the ignition is on, the Auxiliary #2 output can be operated
as long as a vehicle door is open; this prevents the output from being acciden-
tally activated while driving.

• If feature #6 is programmed to have the Auxiliary #2 output disarm the sys-

tem, the doors will unlock when it is activated; and there is an audible and
visual confirmation: 3 siren chirps and one light flash if the system also dis-
arms, and one chirp and light flash otherwise.

• Auxiliary #3 output may be activated at any time, regardless of the ignition

being on or off, and regardless of the security system’s status.

• Auxiliary #3 has no audible and/or visual confirmation.

Summary of Contents for Crime Guard 850i4



























Reviews: