22
ENTER READING CONFIGURATION MENU:
Press
a
1)
Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2)
Display advances to
INPT
Input Menu.
Press
a
3)
Display advances to
RDG
Reading Configuration Menu.
Press
d
4)
Display advances to
DEC
Decimal Point.
DECIMAL POINT SUBMENU:
Press
d
5)
Display flashes previous selection for Decimal location.
Press
b
6)
Scroll though the available selections and choose Decimal
location:
FFFF
or
FFF.F
(also
FF.FF
and
F.FFF
— if
PROC
Process type was selected in the Input Type Menu).
Press
d
7)
Display shows
STRD
stored message momentarily and then
advances to
TEMP
Temperature Unit.
Decimal Point for Process Input Type is passive.
TEMPERATURE UNIT SUBMENU:
Press
d
8)
Display flashes previous Temperature Unit selection.
Press
b
9)
Scroll though the available selections to the Temperature Unit
of your choice:
°F
or
°C
.
Press
d
10)
Display shows
STRD
stored message momentarily and then
advances to
FLTR
Filter Constant.
FILTER CONSTANT SUBMENU:
Press
d
11)
Display flashes previous selection for Filter Constant.
Press
b
12)
Scroll though the available selections:
0001
,
0002
,
0004
,
0008
,
0016
,
0032
,
0064
,
0128
Press
d
13)
Display shows
STRD
stored message momentarily only, if
change was made, otherwise press
a
to advance to the next
menu.
If Process was selected in the Input Type Menu the display will
advance to
IN.RD
Input/Reading Submenu, otherwise the
display advances to the
ALR1
Alarm 1 Menu.
The Filter Constant Submenu allows the user to specify the
number of readings stored in the Digital Averaging Filter.
For PID control select filter value 0001-0004. A filter value of 2 is
approximately equal to 1 second RC low pass time constant.
Summary of Contents for CNI8
Page 69: ...NOTES 65...
Page 70: ...NOTES 66...
