Omega CNI8, Manual

Page: 24 / 72

20
Input Type (RTD)
ENTER INPUT TYPE MENU:
Press
a
1) Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2) Display advances to INPT Input Menu.
Press
d
3) Display flashes
T.ç
,
RTD
or
PROC
(Thermocouple, RTD or
Process). If the displayed input type is RTD , press
a
to skip to
step 6 ( RTD stops flashing).
RTD SUBMENU:
Press
b
4) Scroll through the available selection to RTD (flashing).
Press
d
5) Display shows
STRD
stored message momentarily and then
RTD
(not flashing).
Press
d
6) Display flashes previous RTD type selection i.e. 392.2
(see below for RTD types selection).
Press
b
7) Scroll through the available RTD types to the selection of
your choice.
Press
d
8) Display shows STRD stored message momentarily and then
advances to
RTD
RTD value.
RTD Types: 392 385 Two, Three or Four-wire
Display:
392.2
,
392.3
,
392.4
,
385.2
,
385.3
,
385.4
Last digit indicates: 2-, 3- or 4-wire input.
RTD VALUE SUBMENU:
Press
d
9) Display flashes previous RTD value selection i.e.
100_
(see below for RTD value selection).
Press
b
10) Scroll through the available RTD values to the selection of
your choice.
Press
d
11) Display shows
STRD
stored message momentarily and then
advances to
RDG
Reading Configuration Menu.
RTD Values: 100 ohm 500 ohm 1000 ohm
Display:
100_ 500_ 1000