17
M115
M215
M315
M116
M216
M316
M117
M217
M317
M118
M218
M318
M119
M219
M319
M120
M220
M320
M121
M221
M321
M122
M222
M322
M123
M223
M323
M124
M224
M324
M125
M225
M325
M126
M226
M326
M227
M327
M228
M328
M229
M329
M230
M330
M231
M331
M232
M332
M233
M333
M234
M334
M235
M335
Restore Factory Settings
Lock all buttons by adjusting parameter
to
in
【
Operation Mode
】
. At the same time press
and
keys for 3
seconds to display
, and enter Password-1357. The screen displays
(Parameter reset), selecting
will
overwrite all user settings with factory settings.
Key Lock Function
Adjusting parameter
to
in
【
Operation Mode
】
will lock all keys; adjusting the parameter to
allows adjustment
of SV setting values and F1/F2 function keys.
Unlock the key:
Press
and
keys at the same time in LOCK mode to display
parameter, enter the password to unlock the key. Default
password is 0000.
For altering key-lock password:
1.
Press
key in
screen to enter change-password screen
.
2.
Enter the current password in
screen. If the password is correct, you will be prompted to Set-New-Password
screen
. If the password is incorrect, the screen will return to PV/SV display mode.
3.
Enter the new password two times in the
screen. The screen will return to PV/SV display mode with the keys
unlocked. If the two entries of password are not the same, the screen will go back to the state of step 2.
Cannot remember the password:
Restore factory settings to release the locking.
Alarm Outputs
Two alarm outputs are provided in the machine, a maximum of 3 alarm outputs can be expanded. A total of 19 Independent alarm settings
can be made as listed in the table. Additional settings are provided, such as alarm delay, alarm standby, alarm output hold, alarm reverse
output, and alarm peak record, as described as follows:
a
、
Alarm Delay Setting: Sets alarm delay time. When the movement conforms to the alarm setting mode, controller will delay the
generation of an alarm signal; an alarm will only be activated when the alarm conditions remains confirmed within the delayed period
of time.
b
、
Alarm Standby Setting: An alarm detection will only be activated when the measured value falls within the ±5 range of the specified
input value, so as to prevent an alarm activation on the start-up if the condition conforms to the alarm setting.
c
、
Alarm Output Hold Setting: The alarm message will be held when the alarm activates, unless the control switches off the alarm.
