background image

 

 

CL3515R K/J/T/E/R/S/N/L/U/B/C Calibrator Thermometer 

2. Calibrate Out   

Adjust output in real time. 

 

Value

   

Set the output vale. 

Send   

Press

 “

Send” CL3515R send out the output setting vale. 

 

3. Auto Send 

 

Group Item 

Group 0 to Group 9. 

Step Item Send 

Step Item 0 to Step Item 9. 

Forward 

Select step forward. 

Backward 

Select step backward. 

12 

 

 

CL3515R K/J/T/E/R/S/N/L/U/B/C Calibrator Thermometer 

1. Power button “

 

The “ ” button turns the thermometer on or off. When entering REC mode, the 
power off function is disabled. 
 

Remark: The meter will run self calibration when the meter starts. 

The measuring leads and calibration wires must be removed before 
taking measurements, and you can get accurate calibration values. 

 

2. Button “°C/°F/°K” 

Press the °C/°F/°K button to cycle through temperature scale, °C, °F and °K. 
 

3. Type Selection (thermocouples) 

Press the “type” button and the selected symbol will blink which means in the setting 
mode. 
Press “

” button to make right shifts to cycle through 

K

J

T

E

R

S

N

L

U

B

C

mV. 

Press “

” button to make left shifts to cycle through 

K

mV

C

B

U

L

N

S

R

E

T

J. 

Press the “type” button again to choose the selected thermocouple. 
 

4. Backlight “ ” button 

Pressing the button less than two seconds to turn on and pressing the button again less 
than two seconds to turn off the backlight in the LCD. It will turn off after thirty 
minutes without operation. 

Auto power off 

It is in the APO mode when the meter is turned on and will turn off the meter without 
operation for fifteen minutes. Pressing the “ ” button over two seconds to cancel the 
function. And pressing the “ ” button again to activate the APO function. 
 

5. “REL” button   

The relative value function can be used for comparing the saved reference value with 
other measurements. Press the “REL” button less than to store the current 
measurement as the reference value, and press the “REL” over two seconds to disable 
the function. 
 

6. “HOLD” button     

When HOLD mode is selected, the thermometer holds the present readings and stops 
all further measurements. To activate the data hold mode, press the HOLD button, 
and “HOLD” is displayed on the LCD. Pressing the HOLD button again cancels the 
function, and the instrument will automatically resume measurements. When the Hold 
key is activated, it will stop functions of the other entire key except Power and 
Backlight. 

 

Summary of Contents for CL3515R





















Reviews: