CL3515R K/J/T/E/R/S/N/L/U/B/C Calibrator Thermometer
III Software Operating Instructions
Start
Æ
Program
Æ
CL3515R
Æ
CL3515R
Com Port Select
Select CL3515R Connection Com Port.
10
CL3515R K/J/T/E/R/S/N/L/U/B/C Calibrator Thermometer
Group out
In the OUT mode, press T/C OFFSET less than two seconds. Rotary knob to select
step. Press T/C OFFSET exit group out mode.
WARNING
To avoid possible electrical shock, disconnect the thermocouple connectors from
the thermometer before removing the cover.
MAINTENANCE
Battery Replacement
Power is supplied by a 9 volt battery. (NEDA 1604, IEC 6F22). The “
” appears on
the LCD display when replacement is needed. To replace the battery, remove the two
screws from the back of the meter and lift off the battery cover. Remove the battery
from battery contacts.
Cleaning
Periodically wipe the case with a damp cloth and detergent, do not use abrasives of
solvents.
Periodically wipe the meter with soft and mild cloth. Do not use abrasive or solutions
to clean the meter.
7
