background image

Page - 31

Switch #4- Automatic Ignition Doorlocking: 

This feature has the security system automati-

cally lock the doors 1 second after the ignition switch is turned on, and immediately unlock
them when the ignition switch is turned off.  To have this automatic ignition locking feature
operate, set switch #4 to the “up” position; to turn off automatic locking and unlocking when
the ignition is turned on and off set switch #4 to the “down” position.

Automatic Ignition Doorlocking is factory-set “on” (switch #4 up)

Switch #5- Current Sensing:  

With this feature turned on, when the AL-100-H is Armed it can

then be Activated by its sensing a current draw from the vehicle's battery.  To have the
system Activate if a current draw is sensed, set switch #5 “down”; to turn off Current
Sensing set switch #5 to the “up” position.

Current Sensing is factory-set “off” (switch #5 up)

Switch #6- 15 Second Entry Delay:  

When this feature is on, the system while wait 15

seconds before activating if a door is opened, but only if it was previously allowed to Last
Door Arm itself.  Please consult the Operation Guide for a full description of how this feature
affects the system’s operation.  To turn on the 15 Second Entry Delay, set switch #6 to the
“down” position, to turn off the 15 Second Entry Delay set switch #6 to the “up” position.

15 Second Entry Delay is factory-set “off” (switch #6 up)

Contents

Wiring Diagram ...................................................................................................................... 16-17
Installation Considerations ......................................................................................................... 3-5

Mounting the Control Module, Status Light, Valet Switch & Optional Sensor Port

6-Pin  Arm/Disarm  Wiring  Harness

Determining Connection Type ...................................................................................................... 6
Connection Type Wiring Diagrams ......................................................................................... 7-11

5-Pin  Main Wiring  Harness

Black Wire /  Chassis Ground ..................................................................................................... 12
Red Wire /  Constant Power ........................................................................................................ 12
Red, White & Orange Wires / Starter Interrupt ..................................................................... 13-14
Yellow Wire /  Ignition Power .................................................................................................... 15
Gray Wire /  Trunk Release Disarm Input .................................................................................. 15

8-Pin 6-Wire  Secondary Wiring  Harness

Green Wire /  Negative Door Trigger ................................................................................ 15 & 18
Violet Wire /  Positive Door Trigger ...................................................................................... 18-19
Blue Wire /  Negative Instant Trigger .................................................................................... 19-20
White Wire /  Positive Flashing Parking Light Output .......................................................... 20-21
Pink Wire  Horn Output ......................................................................................................... 22-23
Brown Wire /  Positive Output for an Optional Electronic Siren .......................................... 23-24

Plug-In Power Doorlock Interface Port .................................................................................. 24-29
Programmable Features .......................................................................................................... 30-31

Page - 31

Switch #4- Automatic Ignition Doorlocking: 

This feature has the security system automati-

cally lock the doors 1 second after the ignition switch is turned on, and immediately unlock
them when the ignition switch is turned off.  To have this automatic ignition locking feature
operate, set switch #4 to the “up” position; to turn off automatic locking and unlocking when
the ignition is turned on and off set switch #4 to the “down” position.

Automatic Ignition Doorlocking is factory-set “on” (switch #4 up)

Switch #5- Current Sensing:  

With this feature turned on, when the AL-100-H is Armed it can

then be Activated by its sensing a current draw from the vehicle's battery.  To have the
system Activate if a current draw is sensed, set switch #5 “down”; to turn off Current
Sensing set switch #5 to the “up” position.

Current Sensing is factory-set “off” (switch #5 up)

Switch #6- 15 Second Entry Delay:  

When this feature is on, the system while wait 15

seconds before activating if a door is opened, but only if it was previously allowed to Last
Door Arm itself.  Please consult the Operation Guide for a full description of how this feature
affects the system’s operation.  To turn on the 15 Second Entry Delay, set switch #6 to the
“down” position, to turn off the 15 Second Entry Delay set switch #6 to the “up” position.

15 Second Entry Delay is factory-set “off” (switch #6 up)

Contents

Wiring Diagram ...................................................................................................................... 16-17
Installation Considerations ......................................................................................................... 3-5

Mounting the Control Module, Status Light, Valet Switch & Optional Sensor Port

6-Pin  Arm/Disarm  Wiring  Harness

Determining Connection Type ...................................................................................................... 6
Connection Type Wiring Diagrams ......................................................................................... 7-11

5-Pin  Main Wiring  Harness

Black Wire /  Chassis Ground ..................................................................................................... 12
Red Wire /  Constant Power ........................................................................................................ 12
Red, White & Orange Wires / Starter Interrupt ..................................................................... 13-14
Yellow Wire /  Ignition Power .................................................................................................... 15
Gray Wire /  Trunk Release Disarm Input .................................................................................. 15

8-Pin 6-Wire  Secondary Wiring  Harness

Green Wire /  Negative Door Trigger ................................................................................ 15 & 18
Violet Wire /  Positive Door Trigger ...................................................................................... 18-19
Blue Wire /  Negative Instant Trigger .................................................................................... 19-20
White Wire /  Positive Flashing Parking Light Output .......................................................... 20-21
Pink Wire  Horn Output ......................................................................................................... 22-23
Brown Wire /  Positive Output for an Optional Electronic Siren .......................................... 23-24

Plug-In Power Doorlock Interface Port .................................................................................. 24-29
Programmable Features .......................................................................................................... 30-31

Summary of Contents for AL-100-H

















Reviews: