17
16
En
gl
is
h
Introduction
OMEGA
International Warranty
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
To make a claim under this Warranty, we recommend that you wrap
your
OMEGA
watch carefully so as to avoid any damage and
send it by registered mail or drop it off in person to your nearest
authorised
OMEGA
retailer or an official
OMEGA
Service Centre.
To find current contact information for your nearest authorised
OMEGA
retailer or official
OMEGA
Service Centre, please telephone
+61 3 8844 3300, email [email protected]
or go to www.omegawatches.com.
You will be responsible for paying the expenses associated with
making a claim under this Warranty, including postal or delivery
expenses and any relevant taxes.
OTHER CONDITIONS
No authorised
OMEGA
retailer or official
OMEGA
Service Centre
is authorised to make any modification, extension or addition to this
Warranty.
OMEGA SA
provides no warranty against defects beyond
the rights and remedies given under this Warranty and which are
available under the Australian Consumer Law and the New Zealand
Consumer Guarantees Act 1993.
*
OMEGA SA
Rue Jakob-Stämpfli 96
CH-2502 Bienne
OMEGA
®
and
®
are registered trademarks of
OMEGA SA
1
The crown has 3 positions:
1.
Normal position (wearing position):
the crown pushed in against
the case guarantees water resistance.
2.
Correcting the date:
pull the crown out to position 2, turn the
crown forwards or backwards. Push the crown back to position 1.
3.
Time setting:
pull the crown out to position 3. The seconds hand
will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with
a given time signal.
End of battery life indicator:
The end of battery life is indicated by the seconds hand making
4-second jumps. The watch will continue to function for several days,
but the battery must be removed and replaced by an authorised
OMEGA
service agent as soon as possible.
2 Operating instructions
Quartz watch
CALIBRES 1376, 4061
(fig. IV)
The crown has 2 positions:
1.
Normal position (wearing position):
the crown pushed in
against the case guarantees water resistance.
2.
Time setting:
pull the crown out to position 2, turn the crown
forwards or backwards. Push the crown back to position 1.
CALIBRES 1532, 4561, 4564
(fig. I)
