Omega Engineering wi Series, User Manual

Page: 55 / 96

4.3.7.6.1 Display Color Examples
Press 1) Display flashes previous selection for “Alarm 2 Color Display”.
Press 2) Scroll through the available selections:
G GR RN N
,
R REE
d d
or
A AM M
B B
R R
.
Press 3) Display shows
S S
t t
R R
d d
stored message momentarily and then
momentarily shows the software version number, followed by
R RS S t t
Reset, and then proceeds to the Run Mode.
Example 1:
Output 1 & Output 2 = SSR
Alarm Setup: Absolute, Above, Alarm 2 HI Value “ALR.H” = 200,
Alarm 1 HI Value “ALR.H” = 400
"Color Display" Setup: Normal Color “N.CLR” = Green,
Alarm 1 Color “1.CLR” = Amber, Alarm 2 Color “2.CLR” = Red
Display Colors change sequences:
GREEN RED AMBER
•--
➤
------------------------------•-----------------------------•------------------------------
➤
0 AL2.H = 200 AL1.H = 400
Example 2:
Output 1 & Output 2 = Pulse
Alarm Setup: Absolute, Below, Alarm 2 Low Value “ALR.L” = 300,
Alarm 1 Low Value “ALR.L” = 100
Color Display Setup: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" = Red
Display Colors change sequences:
AMBER RED GREEN
• --------------•----------------------------------•------------------------------------------- --•
0 AL1.L = 100 AL2.L = 300
For complete Front Panel Pushbutton procedures, refer to the
Supplemental Guide.
49
➤ ➤