4.3.6 Controller Setup
The Meter has two modes of operations. One is through the Front Panel Buttons
(please refer to
Front Panel Supplement
for more details), and the other is by
using the browser to configure the settings. Click on
from the Home
Page. In a few seconds the following page will appear.
Figure 4.13a Controller Setup
Channel 12
Please refer to local regulation for maximum transmit power range
Transmit Power Range
Reset
PID 13106 (version x.x)
iSeries Firmware Version x.x
End Device ID -
Input
Setpoints & On/Off
Alarm 2
Alarm 1
Loop Break
Passcode ID
Display
Permanent Store
Enable Standby Mode Before Configuring Unit
Scrolling
Main Menu
CONTROLLER SETUP
Setup
Transmit Power
Misc.
Monitor
CONTROLLER SETUP
http://192.168.1.200
Address
Update
Update
Update
20dBm
Controller
36
A
B
C
D
