Omcan SM-IT-0053-F, Instruction Manual

Page: 9 / 28

9
Operation
point, remove the dough from the tank and proceed with machine cleaning. If kneading machine operations
are stopped for any reason, wait at least 15 seconds before restarting. Even though it is functionally identical
to other versions, the machine with liftable head and removable tank is differentiated for easier removal of
the dough at the end of the working cycle, as well as easier cleaning. To lift the head and extract the tank,
proceed as follows: stop the machine by pressing the red emergency button D; disconnect the plug from the
electrical power supply; completely remove the mobile protection; horizontally pull the pin using the handle
located on the right side of the machine until the head is released; lift the head using the lower piston; turn the
disc located under the tank in a clockwise direction and extract the tank to remove the dough. After finishing
machine cleaning, reassemble the tank by following the previously described steps in a backwards order,
making sure that the pins beneath the tank are correctly inserted into the holes on the machine.
Before removing the dough, always perform the shut-down steps
SAFETY DEVICES
The kneading machine is equipped with safety devices to protect the user, including a mobile protective grating
and a device that ensures the grating is lowered. The kneading machines with liftable heads and removable
tanks are also equipped with a device that checks whether the head is lifted or lowered, a blocking pin for the
head in a lowered position, a device that checks whether the tank is inserted or removed and a tank blocking
disc.
Before proceeding with working phases, check the status of the various safety devices. These are in a
good state when:
• The machine stops when the grating is lifted.
• The machine stops and will not start when the machine head is lifted.
• The machine stops and will not start when the tank is removed.
• When pulling the tank and the head slightly upwards, they remain blocked in their positions.
SHUT-DOWN PHASE
To shut down the kneading machine, press the red emergency button D and turn the main switch knob A to the
position “0”.
Maintenance
SAFETY PRECAUTIONS
Before performing any maintenance operations, including cleaning, take the following precautions:
• Make certain that the main switch is disconnected.
• Make certain that the electrical power cannot be accidentally reinserted. Disconnect the plug from the
electrical power socket.
• Use individual protection devices in compliance with the directive 89/391/CEE.