Omcan SM-IT-0053-F, Instruction Manual

Page: 7 / 28

7
Installation
Installation must be executed by qualified personnel in compliance with local, national and European
regulations.
KNEADING MACHINE LEVELLING
If the machine is unstable due to floor irregularity, adjust the support feet or wheels by inserting rubber pieces.
EQUIPMENT HOOK-UP
Electrical connection
It is sufficient to connect the power supply cable to the electrical mains power supply. The electrical outlet must
be easy to access, no moving should be necessary.
The electrical connection (plug) must be easily accessible, also following kneading machine
installation.
The distance between the machine and the socket must be adequate to not cause tension in the power supply
cable. In addition, the cable must not be located beneath the machine support feet or wheel.
If the electrical power supply cable is damaged, it must be replaced by the technical assistance service
or by a qualified technician to prevent any risks.
GROUND CONNECTION
DANGER: It is mandatory that the electrical system is equipped with a ground connection and
differential switch that comply with currently enforced laws.