![background image](http://html1.mh-extra.com/html/omcan/mt-it-370/mt-it-370_instruction-manual_4143982009.webp)
9
Installation and Operation
CONTROLS AND INDICATORS
LIST OF CONTROLS AND INDICATORS (FIG. 3.1.1)
1. Run button.
- Press to start the machine.
2. Stop button.
- Press to stop the machine.
3. Start button LED.
- Lights up when the start button is pressed.
FACTORY TESTING, SHIPPING, DELIVERY AND INSTALLATION
FACTORY TESTING
The machine you have purchased has been tested at our plants to verify its correct operation and proper
adjustment. The tests were conducted using materials similar to those processed by the user.
DELIVERY AND HANDLING
All shipped material is carefully checked prior to being handed over to the shipping agent. Unless otherwise
agreed with the customer, the machine is wrapped in nylon and strapped to the pallet. It is then covered with
cardboard, which is also strapped to the pallet. When you receive the machine, check the condition of its
packaging. If you notice any damage to the packaging, sign the delivery note with the following note: “Goods
accepted with reservation...” and the reason. If you notice any damage to the components of the machine after
opening the package, report it to the shipping agent within three days from the date shown on the documents.
INSTALLATION
CAUTION!
The installation zone must be level and solid, while the surface on which the machine rests must provide
stable and safe support. Moreover, the machine must be placed where there is ample space around it. This will
facilitate manoeuvring during work phases and ensure easy access for subsequent maintenance operations.
Provide adequate lighting around the machine to ensure good visibility for the operator using it. Remove the
cellophane wrapping and any other packaging present inside.
DISPOSAL OF PACKAGING
The packaging materials (cardboard, nylon, wood, etc.) can be regarded as solid urban waste. As a result,
they can be disposed of freely. Nylon is a polluting substance that releases toxic fumes when burnt. Do not
burn or dump it, but dispose of it according to the law. If the machine is delivered to a country where special
regulations apply, dispose of the packaging accordingly.
Summary of Contents for MT-IT-370
