Omcan MT-IT-370, Instruction Manual

Page: 7 / 24

7
Safety and Warranty
personal injury. Make sure that the signs are always present and legible. If they are not, apply or replace them.
GUARDS AND SAFETY DEVICES
CAUTION!
Before using the machine, make sure that its safety devices are properly positioned and in good working
order. Check that they are present and work properly at the start of each shift. If not, notify the maintenance
supervisor.
WORK POSITION
To optimize work with the machine, the operator should assume the position shown in Fig. 1.9.1.
VIbRATIONS
The vibrations which the machine transmits to the work surface are negligible.
ENVIRONMENTAL CONDITIONS
The machine is designed to work in the following environmental conditions:
• Minimum room temperature: –5°C.
• Maximum room temperature: +40°C.
• Relative humidity: 50% at 40°C.
LIGHTING
The machine must be installed in a place that ensures adequate natural and artificial lighting as required by
local regulations in the country of installation. At all events, the lighting must comply with the local regulations
in force in the country of installation and should not generate hazardous reflections. The lighting system must
ensure clear reading of the control panels and the start and stop buttons must be clearly identifiable.
SAFETY EQUIPMENT
No special equipment is required. We advise using regulatory rubber gloves suited for working with food
products.
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LAbOUR bENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either