![background image](http://html1.mh-extra.com/html/omcan/mt-it-370/mt-it-370_instruction-manual_4143982010.webp)
10
Installation and Operation
HANDLING THE MACHINE
CAUTION!
Take care when handling the machine: dropping it accidentally can seriously damage it. To avoid muscle
injuries, lift the machine by flexing your legs.
ELECTRICAL CONNECTIONS
CAUTION!
Check that the power supply line has the same specifications as those shown on the machine’s rating plate.
All interventions must be carried out solely by specialised personnel expressly authorised by the relevant
supervisor. Make the connection to a power line equipped with an efficient earthing socket.
In this configuration, the machine is supplied with a power cable with 3 x 18 AWG. It is connected to a NEMA
5-15P plug. Attach the power cable to the 110-120 V - 60 Hz singlephase power supply line by installing a 10
A residual-current circuit breaker in between. Consult the manufacturer for configurations differing from those
mentioned above. If the power cable needs to be extended, use a cable of the same gauge as the original
cable installed by the manufacturer.
START-UP AND SHUTDOWN
VERIFICATION OF THE CORRECT ELECTRICAL CONNECTION
Plug the cable into the power socket; press the run button (“1”, Fig. 3.1.1).
Note: in machines connected to a single-phase line and specifically designed for this system, the
rotation direction will be defined directly by the manufacturer.
VERIFICATION OF THE PRESENCE AND EFFICIENCY OF GUARDS AND SAFETY DEVICES
With the machine connected to the mains electricity, open the tool cover. The machine must stop.
VERIFICATION OF THE EFFICIENCY OF THE EMERGENCY STOP bUTTON (FIG. 3.1.1)
With the machine connected to the electricity and the accessory tool moving, press the stop button (2). The
machine must stop.
MACHINE START-UP (FIG. 3.1.1)
To start the machine, plug it into the power outlet then press the start button (“1” Fig. 3.1.1).
MACHINE STOP (FIG. 3.1.1)
To stop the machine, simply press the stop button (“2” Fig. 3.1.1).
Summary of Contents for MT-IT-370
