![background image](http://html1.mh-extra.com/html/omcan/mt-it-370/mt-it-370_instruction-manual_4143982012.webp)
12
Maintenance
CAUTION!
Maintenance and cleaning must always be carried out with the machine at a standstill and disconnected from
the mains power supply. Always keep the maintenance zone clean and dry. Do not allow unauthorized persons
to intervene on the machine. Parts and tools must be replaced using original spare parts at authorised service
centres, or directly by the manufacturer.
LUbRICATION
The machine does not require any lubrication.
CLEANING THE MACHINE
CAUTION!
Disconnect the machine from the mains power supply before cleaning it. Do not clean the machine using
a water jet. Only use non-toxic detergents specifically formulated for cleaning components used with food
products. The knives are made of AISI 430 grade steel, therefore rust may form if they are left immersed or
wet. We suggest drying them after they are washed.
• Turn the interlocked blade cover (Ref. 4 Fig. 6.4.1) by 90° and push it towards the left: the blade guard will
come off.
• Detach the blade cartridge lever (Ref. 5 Fig. 6.4.1).
• Take the cartridge (Ref. 2 Fig. 6.4.1) off the bars of the base using the handle and pull it so that the blade
pins detach from the drive mechanism.
• Place the cartridge on the bars of the base (Ref. 1 Fig. 6.4.1).
•
Put the blade cartridge and the guards in the dishwasher.
• Wash the base by hand using non-aggressive detergents.
•
After completing the cleaning operations, assemble all the components by following the instructions in
reverse order.
Troubleshooting
Malfunctions
Causes
Remedies
The machine does not start.
The residual current circuit breaker
is set to “0”.
Set the switch to “I”.
The plug switch is set to “0”.
Set the switch to “I”.
The start button does not work.
Contact the technical assistance
service.
The safety devices are not all
present or mounted properly.
Check the safety devices.
The product is not cut correctly.
The knives of the blade roller are
blunt.
Sharpen the knives or replace
them.
Summary of Contents for MT-IT-370
