![background image](http://html2.mh-extra.com/html/omcan/fp-it-0006/fp-it-0006_instruction-manual_5153230006.webp)
6
Safety and Warranty
OPERATIONS FOR EMPTYING THE TANK:
•
Set the circuit breaker upstream of the machine to “0”.
•
Turn the release knob on the lid counter-clockwise.
•
Open the lid.
•
Turn the lock knob of the blade holder.
•
Remove the blade holder.
•
Turn the tank counter-clockwise.
•
Lift the tank.
The controls are placed in an easily accessible location and consist of two 24V buttons. Special care was
applied when designing the machine to ensure that operators can perform cleaning tasks with ease, in
particular thanks to the following constructional features:
•
Simple removal of the propeller without the need for tools.
•
All electrical parts manufactured according to a minimum degree of protection IP 56.
The models depicted in this manual were built in accordance with EC Directive 2006/42 as amended. In the
event of an accident, no responsibility can be charged to the manufacturer if the machine has been altered or
tampered with, if its safety guards have been removed or if the machine is used for purposes not intended by
the manufacturer.
INTENDED USE
The machine was designed and built for shredding, mincing and mixing meat for sausages and vegetables.
It must be used in professional environments and staff assigned to its use must be a skilled operator in the
sector that must have read this manual carefully before using the machine. We recommend installing the cutter
indoors, protected from weather and from strong fluctuations in temperature.
IMPORTANT!
The size of the product to be mixed must be such as to fit entirely in the tank and never exceed the weight of 4
Kg (for cutter 6) and of 8.5 kg (for cutter 12).
IMPROPER USE
The cutter must only be used for the purposes approved by the manufacturer; more specifically:
• Do not use the machine to mix foodstuffs other than meat or vegetables.
•
Do not use the machine if it is not properly installed with all the safety guards intact and assembled
correctly, in order to avoid the risk of severe personal injury.
• Do not access the electrical components without having previously cut-off power supply to the machine:
doing so entails the risk electrocution.
• Do not process products in quantities exceeding the total capacity of the tank.
•
Do not wear clothing that does not comply with the applicable accident prevention regulations. Consult your
employer as to the applicable safety regulations and safety devices to be used.
•
Do not start the machine if it is malfunctioning. Before using the machine, make sure that you have
removed/solved any safety-threatening condition. If you notice any kind of malfunction or flaw, stop the
machine and warn those responsible for maintenance.
Summary of Contents for FP-IT-0006
