background image

5

Safety and Warranty

casings removed. Do not use the machine under such conditions, but only if all of the guards are assembled 

correctly and are working perfectly. The manufacturer prohibits the reproduction, even partial, of this manual, 

and its contents may not be used for any purpose other than those explicitly authorised by the manufacturer. 

Any infringement will be prosecuted according to law.

STORAGE AND USE OF THE MANUAL

The purpose of this manual is to inform the users of the machine by means of texts and detailed illustrations 

of the rules and essential guidelines for transporting, handling, use and maintenance of the machine. Carefully 

read this manual before using the machine. Store it carefully near the machine, in a place that is easily and 

quickly accessible for any future reference. If the manual is lost or damaged, request a copy from your dealer 

or directly from the manufacturer. In the event of transfer of the machine, be sure to inform the manufacturer 

of the contact details and address of the new owner. The manual reflects the state of the art at the time the 

machine was introduced on the market and cannot be considered inadequate if updated versions are issued 

as a result of technological progress. Regarding the above, the manufacturer reserves the right to update the 

production and associated manuals without the obligation to update previous productions and manuals, unless 

in exceptional cases. In case of doubt, consult your nearest service centre or the manufacturer directly. The 

manufacturer is committed to continuously improving the state of the art of its product(s). For this reason, the 

manufacturer welcomes any suggestions from its customers that may help improve the machine and/or the 

manual. The machine was delivered to the user under the warranty conditions valid at the time of purchase. 

Please contact your supplier if you wish to receive clarifications or more information.

WARRANTY

Under no circumstances is the user authorised to tamper with the machine. Should you uncover malfunctions 

or flaws, contact the manufacturer. Any attempt to disassemble, modify or more generically tamper with 

any component of the machine by the user or by unauthorized personnel will result in the revocation of the 

declaration of conformity issued pursuant to EC Directive 2006/42, will invalidate the warranty and relieve the 

manufacturer of any liability for damages to persons and property caused by such attempts. The manufacturer 

shall also consider itself relieved of any responsibility in the following cases:

• 

Improper installation.

•  Improper use of the machine by inadequately trained staff.

• 

Use of the machine contrary to the regulations/standards in force in the country of use.

• 

Lack of or negligent maintenance.

•  Use of non-original spare parts and non-specific for the model.

• 

Total or partial lack of observance of the instructions.

DESCRIPTION OF THE MACHINE

The cutter in your possession is a simple machine with high performance and power output. Because it must 

be used to mince and mix food products, the components that may come in contact with the product have been 

carefully chosen to ensure the highest level of hygiene. The blades on all models are built in stainless steel 

AISI 420 to ensure longer durability and maximum hygiene.

Summary of Contents for FP-IT-0006

































Reviews: