15
Maintenance
checks and inspections (besides those described hitherto) with the frequency listed below.
bEFORE EACH WORK SHIFT:
•
Check the operation of the safety devices - daily.
•
Check the integrity of the power cable.
IMPORTANT!
If the machine does not stop when you open the lid or in the event of other malfunctions, request the
assistance of customer service.
AFTER EVERY WORK SHIFT:
•
Thoroughly clean the machine by removing any processing residue.
•
Remove, clean and replace the blades and tank.
CLEANING THE MACHINE
At the end of each work shift, thoroughly clean the machine and disinfect it if necessary.
•
Stop the machine, switch the circuit breaker installed upstream of the mixer to “0” and detach the power
plug.
•
With a sponge soaked in water and neutral and non-toxic degreasing products, remove all processing
residue from the machine.
Do not use gasoline, solvents or other flammable liquids as detergents; instead, use authorised commercial
solvents (non-toxic solvents and non-flammable). Adapt the guards to be used when cleaning and disinfecting
the machine based on the type of solvent. Follow the instructions of the cleaning products.
IMPORTANT!
The cutter has been designed and manufactured to process meat and vegetables; therefore, it is compulsory
to use non-toxic and neutral detergents that are suitable to disinfect components used to process foodstuffs.
LUbRICATION
The transmission gearbox is greased for life and therefore does not have to be replaced from time to time.
REPLACEMENT OF SPARE PARTS
Contact your local dealer should you need to order spare parts. Do not use spare parts that are not original.
Please remember that the machine must be assembled by qualified personnel only.
Summary of Contents for FP-IT-0006
