Omcan 46320, Instruction Manual, Page: 21 / 48

21
Maintenance
Troubleshooting
After defining the value, press Button SW5 once in order to register the value in the memory.
In the matrix that is presented below you can find a short description of the functions that can be adjusted by
the user, as well as their default values.
In order to exit the User’s Menu, press-hold Button SW6 for 3 sec. The beeper sounds three times and
message “OFF” appears on screens.
After closing the User’s Menu, the machine is shut down.
No Parameter Range Default Indication
1 TEMPERATURE MODE C/F C C
2 BOILER TEMPERATURE 30-92 C 85 C bt
3 TANK TEMPERATURE 30-70 C 60 C tt
4 DETERGENT TIME AT FILLING 100 – 300 SEC 180 SEC dF
5 DETERGENT TIME AT CYCLE 0 – 30 SEC 13 SEC dc
6 RINSE AID TIME AT FILLING 0 – 90 SEC 35 SEC rF
7 RINSE AID TIME AT CYCLE 0 – 30 SEC 12 SEC rC
8 ADDITIONAL RINSE 0 (NO) – 1(YES) 0 Cr
9 DRAINING DURATION 20 -60 SEC 25 Cd
ALARMS
If the system records any malfunction, then a warning message will be displayed on the screen. If such a
condition occurs, please advise the following table which describes the problem shortly. Should you need
further assistance, don’t hesitate to contact your local reseller.