Omcan 46320, Instruction Manual, Page: 14 / 48

14
Installation
ATTENTION:
• Make sure that no residuals remain to the water supply line before connecting it to the machine.
• Plumbing connections must be made in such way that will allow the machine to be moved for service and
cleaning.
• PRV MUST be installed and adjust at 20 PSI otherwise the warranty is voided.
Min water inlet temp. Operating flow pressure. Min wash temperature. Min rinse temperature.
40°C 20 ±5 PSI 165°F / 74°C 165°F / 74°C
• Connect the PRV valve in the water supply shut off valve.
• Connect the water supply hose to the PRV in one side and in the machine on the other side.
Attention: source water hardness must not intervene 10°F / 6 Gd.
ELECTRICAL CONNECTION
Attention: Before make any electrical connection or service, disconnect the main electrical supply and
lock it out in order to clearly indicate that there is work in progress.
I. Open the lower front cover (2 bolts).
II. Open the top cover of electrical circuit.
III. Connect the cable to the terminal block (Attention: strain relief knockout must be placed by the
installer).
Caution: 15 cm loop of wire must be left inside the machine in order to allow servicing.
IV. Replace the top cover.
V. Replace and secure the lower front cover.