Omcan 46320, Instruction Manual, Page: 18 / 48

18
Operation
• Load the basket in a proper way and place it inside the machine.
All the residuals on the dishes and glasses must be removed
• Close the door.
• Start a washing cycle by pressing the preferable washing cycle time button.
Program Wash time Rinse time
Short (SW1) 103 sec. 16 sec.
Standard (SW2) 163 sec. 16 sec.
Long (SW3) 223 sec. 16 sec.
If for any reason the door open the washing cycle is stopped and must start all over again.
DETERGENT AND RINSE AID PUMP OPERATION
This machine is equipped with peristaltic pumps for the rinse aid and the detergent filling. The filling inlets for
each one are the two corresponding hoses which should be immersed in the appropriate tanks.
The dosing procedure is performed in two stages. Firstly during the initial filling (when you turn the machine on)
and additional after each washing cycle:
• 1st Stage: During automatic preparation (before the first wash) the machine receives from the tank soap
for 180 sec and rinse aid for 35 sec. This could be adjusted from the user th¬rough the User Menu *Check
Section “User Menu”.
• 2nd Stage: During every complete washing & rinsing cycle, the machine receives detergent for 13 sec and
rinse aid for 12 sec. This could be adjusted from the user through the User Menu *Check Section “User
Menu”.
• When “END” appears on the 2 7 segment screens the washing cycle has finished and you can remove the
basket.
• Allow the dishes and glasses to dry out of the dishwasher.
The dishwasher is equipped with thermo-protector so the rinsing does not start unless the rinse
temperature to be 165°F / 74°C. In this case washing cycle time may be extended until the final rinse
temperature to reach 165°F / 74°C.