![background image](http://html2.mh-extra.com/html/olympus/t-10/t-10_instruction-manual_4037175068.webp)
68
EN
Notes regarding warranty maintenance
1
This Warranty will only be valid if the Warranty Certi
fi
cate is
duly completed by Olympus or the dealer. Make sure that
your name, the name of the dealer, the serial number and the
year, month and date of purchase are all completed.
2
Since this Warranty Certi
fi
cate will not be re-issued, keep it in
a safe place.
3
Any request for repair by a customer in same country where
the product was purchased shall be subject to the terms
of the warranty issued by the Olympus distributor in that
country. Where the local Olympus distributor does not issue a
separate warranty or where the customer is not in the country
where the product was purchased the terms of this worldwide
warranty shall apply.
4
Where applicable, this Warranty is valid worldwide. The
Olympus authorized service stations listed in this Warranty
will gladly honor it.
* Please refer to the appended list for the authorized
international Olympus service network.
Disclaimer of Warranty
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content if these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or
fi
tness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business pro
fi
ts, business interruption and loss of business
information) arising from the use of inability to use these written
materials or software. Some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, so
the above limitations may not apply to you.
Trademarks
Trademarks
IBM is a registered trademark of International Business
Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft
Corporation.
Macintosh is a trademark of Apple Inc.
SDHC logo is a trademark.
All other company and product names are registered
trademarks and/or trademarks of their respective owners.
The standards for camera
fi
le systems referred to in this
manual are the “Design rule for Camera File system/DCF”
standards stipulated by the Japan Electronics and Information
Technology Industries Association (JEITA).
•
•
•
•
•
•
Summary of Contents for T-10
Page 70: ......
Page 71: ...VR082202...