①
Click [Gauge].
②
Click [Diameter].
③
Place the gauge on the screen.
(a) Enter the value for [Diameter] directly.
(b) You can change the [Diameter] in 1 mm
increments using these buttons.
(c) Enter the values for the gauge position directly.
(d) You can change the gauge position in 1 mm
increments using these buttons.
(e) Select the [Weight / Color] of the dimension lines.
(f)
Check this box to display dimension lines.
(g) Select the position of the dimension lines from the
Top Right, Bottom Right, Bottom left, or Top Left
of the gauge.
Circular gauge
1
Operation procedure of the software
16
