![background image](http://html2.mh-extra.com/html/olympus/sp-100ee/sp-100ee_instruction-manual_4298047062.webp)
62
EN
62
EN
For the operation method, refer to (P. 45).
Adjusting the image processing function
d
[Pixel Mapping]
• This function has already been adjusted at factory shipping, and no
adjustment is needed right after purchase. Approximately once a year is
recommended.
• For best results, wait at least one minute after taking or viewing pictures
before performing pixel mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function
Press the
A
button when [Start] (Submenu 2) is displayed.
• The check and adjustment of the image processing function starts.
d
Settings Menu 2
Adjusting the brightness of the monitor
d
[
s
]
1
Use the control dial to adjust the brightness while
viewing the back monitor, and then press the
A
button.
• You can adjust the brightness using
FG
.
MENU
Back
s
Adjusting the brightness of the viewfinder (EVF)
d
[EVF Adjust]
1
Use the control dial to adjust the brightness while looking through the
viewfinder (EVF), and then press the
A
button.
• You can adjust the brightness using
FG
.
Control dial
MENU
Back
EVF Adjust
Summary of Contents for SP 100EE
