Olympus SP 100EE, Instruction Manual

Page: 100 / 109

100 EN
FCC Notice FCC Notice
• Radio and Television Interference
• Changes or modi fi cations not expressly approved
by the manufacturer may void the user’s authority
to operate this equipment. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
• This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
• However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Adjust or relocate the receiving antenna.
• Increase the distance between the camera and
receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult your dealer or an experienced radio/TV
technician for help. Only the OLYMPUS-supplied
USB cable should be used to connect the camera
to USB enabled personal computers (PC).
FCC Caution FCC Caution
Changes or modi fi cations not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
For customers in North and South For customers in North and South
America
America
For customers in USA
Declaration of Conformity
Model Number:
SP-100EE
Trade Name: OLYMPUS
Responsible Party:
Address: 3500 Corporate Parkway,
P.O. Box 610, Center Valley,
PA 18034-0610, U.S.A.
Telephone Number: 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
For customers in CANADA
This Class B digital apparatus complies with
Canadian ICES-003. CAN ICES-3(B)/NMB-3(B)
OLYMPUS WORLDWIDE LIMITED
WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus®
imaging product(s) and related Olympus®
accessories (individually a “Product” and collectively
the “Products”) will be free from defects in materials
and workmanship under normal use and service for a
period of one (1) year from the date of purchase.
If any Product proves to be defective within the one-
year warranty period, the customer must return the
defective Product to any of Olympus Service Centers,
following the procedure set forth below (See “WHAT
TO DO WHEN SERVICE IS NEEDED”).
Olympus, at its sole discretion, will repair, replace, or
adjust the defective Product, provided that Olympus
investigation and factory inspection disclose that
(a) such defect developed under normal and proper
use and (b) the Product is covered under this limited
warranty.