103
EN
For customers in Europe
For customers in Europe
“CE” mark indicates that this
product complies with the
European requirements for
safety, health, environment
and customer protection. “CE”
mark cameras are intended for
sales in Europe.
This symbol [crossed-out
wheeled bin WEEE Annex IV]
indicates separate collection of
waste electrical and electronic
equipment in the EU countries.
Please do not throw the
equipment into the domestic
refuse.
Please use the return and
collection systems available in
your country for the disposal of
this product.
This symbol [crossed-out
wheeled bin Directive 2006/66/
EC Annex II]
indicates separate collection
of waste batteries in the EU
countries.
Please do not throw the
batteries into the domestic
refuse.
Please use the return and
collection systems available in
your country for the disposal of
the waste batteries.
Provisions of warranty
1
If this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during the applicable national
warranty period and has been purchased from
an authorized Olympus distributor within the
business area of Olympus Europa SE & Co. KG
as stipulated on the website: http://www.olympus.
com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under
this warranty the customer must take the product
before the end of the applicable national warranty
period to the dealer where the product was
purchased or any other Olympus service station
within the business area of Olympus Europa SE &
Co. KG as stipulated on the website: http://www.
olympus.com.
During the one year period of the World Wide
Guarantee the customer may turn the product
in at any Olympus service station. Please notice
that not in all countries such Olympus service
station exists.
2
The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP.” grants a one
year World Wide Guarantee. This worldwide
Guarantee must be presented at an Olympus
authorized repair service station before any repair
can be made under conditions of this Guarantee.
This Guarantee is valid only if the Guarantee
Certi
fi
cate and proof of purchase are presented
at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
affect the customer’s legal warranty rights under
the applicable national legislation governing the
sale of consumer goods mentioned above.
2
This Guarantee does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the
Guarantee period referred to above.
a.
Any defect that occurs due to mishandling (such
as an operation performed that is not mentioned
in the Handling Care or other sections of the
instructions, etc.)
b. Any defect that occurs due to repair,
modi
fi
cation, cleaning, etc. performed by anyone
other than Olympus or an Olympus authorized
service station.
c. Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase of
the product.
d. Any defect or damage that occurs due to
fi
re,
earthquake,
fl
ood damage, thunderbolt, other
natural disasters, environmental pollution and
irregular voltage sources.
Summary of Contents for SP 100EE
