Applicable
models
Underwater case mount for digital camera
Arm mount for use on the bracket grip
extremity
4
■
Thank you for buying the Olympus PTBK-E01 Underwater Bracket. To ensure that you use this
product safely and correctly, please read this instruction manual carefully and keep it handy for
future reference.
■
This product is an underwater bracket for use with the PT-E series underwater case. By attaching
an optional short arm to the bracket’s grip, you can combine it with optional underwater cases for
digital camera and electronic flash.
Operating Precautions
■
This product is designed exclusively for use with the following PT-E series underwater cases. Do
not combine this product with any product other than those listed below.
Nomenclature/Mounting Method
As of June 2005
■
Ensure that the PT-E series underwater case is attached securely before using this product.
Adjusting the Bracket Grip Position
The bracket position can be adjusted according to the mounting position of the bracket base.
①
Loosen the two bracket grip clamping screws using the bracket grip clamping wrench that is provided with this product.
②
Slide the bracket grip to extend or contract the length.
③
Tighten the two bracket grip clamping screws.
PTSA-01
PT-E01
①
Bracket grip mount
②
PT-E series waterproof case mount
③
Bracket base
④
PT-E series waterproof case clamping screws (x 2)
⑤
Bracket grip clamping screws (x 2)
⑥
Bracket grip
⑦
Arm mount for use on the bracket grip extremity
⑧
Bracket grip clamping wrench
Attach the bracket grip to the
bracket grip mount on the bracket
base using the two bracket grip
clamping screws.
Attach the PT-E series waterproof
case to the PT-E series waterproof
case mount on the bracket base
using the two PT-E series water-
proof case clamping screws.
①
②
③
(Optional) Underwater case for flash
(Optional) PTSA-01 short arm
(Optional)
Waterproof lens port
for the PT-E series
(Optional)
PT-E series
waterproof
case
The following
products can
also be
mounted.
