74
3.7 Checking the MRC level and entering the check result
OER-Elite OPERATION MANUAL
Ch.3
NOTE
If the “Save” button is pressed after “Fail” has been selected, the processes that
use the disinfectant solution cannot be started.
NOTE
• Input the user ID by following the instructions in Section 3.6, “Entering ID” (If
applicable). Hold the user ID card in parallel with the ID reader section of the
reprocessor or press the “Edit” button for software keyboard input.
Figure 3.51
• The user ID input can be omitted according to the user ID input setting. For details,
refer to Section 4.5, “User ID Setting”.
3
Press the “Save” button.
Figure 3.52