Olympus OER-Elite Operation Manual Download Page 110

Page: 110 / 138

100

4.14 Filter replacement indicator

OER-Elite OPERATION MANUAL

Ch.4

No.

Item/Button

Setting options

Description

Water filter

replacement

indicator

OFF

Disables the filter replacement indicator of water filter.

ON (default)

The water filter replacement indicator is displayed when the day

count is reached the set value.

Edit

–

To change the day count of water filter, press the “Edit” button to

open the Water Filter Indicator screen.

Refer to “

Editing the set value for water filter” on page 101.

Air filter

replacement

indicator

OFF

Disables the filter replacement indicator of air filter.

ON (default)

The air filter replacement indicator is displayed when the set day

count is reached.

Edit

–

To change the day count of the air filter, press the “Edit” button to

open the Air Filter Indicator screen.

Refer to “

Editing the setting value for air filter” on page 102.

Gas filter

replacement

indicator

OFF

Disables the filter replacement indicator of gas filter.

ON (default)

The gas filter replacement indicator is displayed when the set day

count is reached.

Edit

–

To change the day count of the gas filters on lid and tank, press the

“Edit” button to open the Gas Filter Indicator screen.

Refer to “

Editing the set value for gas filter” on page 102.

Cancel

–

Returns to the Setting menu without saving the edited information.

Save

–

Returns to the Setting menu after saving the edited information.

NOTE

The selected settings are displayed with white buttons.

Press the “Save” button to save the edited information.

Summary of Contents for OER-Elite











































































































































Search results

Summary of Contents for OER-Elite

Reviews:

Olympus OER-Elite, Operation Manual, Page: 110 / 138

Search results

Summary of Contents for OER-Elite

Reviews: