46
3.6 Entering ID
OER-Elite OPERATION MANUAL
Ch.3
Scope ID entry
1
Press the “Reprocessing” button on the Menu Screen.
2
Hold the internal ID endoscope connector or the external ID tag near the RFID reader
on the OER-Elite. A short beep will indicate the tag was read successfully.
Figure 3.12
3
If the connection guide display setting is
activated, when the ID has been read, the
following screen appears.
Figure 3.13
For internal ID endoscope
(For example 180 series endoscope)
For external ID tag
For internal ID endoscope (190
series endoscope
1
)
Scope ID mark
1 190 series endoscopes may not be available in some areas.