manualshive.com logo in svg

Olympus EPOCH 1000 Series, User Manual

Share
Download
Olympus EPOCH 1000 Series User Manual Download Page 200

910-269-EN, Rev. B, June 2011

188    Chapter 10

  

10.4 Setting Up and Printing Reports

The EPOCH 1000 Series allows you to create basic reports on the instrument from 
stored or live data and print them out in the field using the USB host port of the 
instrument. To print an onboard report, you must be able to set up a 

Report Header

, 

set up the printer output, and have access to a PCL5 compatible printer.

To set up and print a report

1.

Choose 

5/5 > Files > Page Setup

 to open the 

ReportSetup 

setup page.

Figure 10-7  The ReportSetup setup page

2.

Using the virtual keyboard or a USB keyboard:

a)

Enter up to eight lines of text for the 

Report Label

.

 

These lines appear at the top of the report that is printed from the instrument.

b)

Enter up to eight lines of text for the 

Report Header

. 

 

These lines also appear at the top of the report that is printed from the 
instrument.

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for EPOCH 1000 Series













































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands