manualshive.com logo in svg

Olympus EPOCH 1000 Series, User Manual

Share
Download
Olympus EPOCH 1000 Series User Manual Download Page 193

910-269-EN, Rev. B, June 2011

Managing the Data Logger    181

  

Figure 10-3  The File ID review screen

While the focus is on a file name, five parameter functions are available at the bottom 
of the setup page:

Open

Used to open the highlighted file as the active storage location.

Cancel

Used to leave the setup page and return to the live screen.

Rename

Used to rename the highlighted file.

Clear

Used to clear all data from the highlighted file but retaining the file structure, the 
file name and all IDs.

Delete

Used to delete the entire file, clearing the file contents and removing the file name 
and IDs from the available file list.

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for EPOCH 1000 Series













































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands