![background image](http://html2.mh-extra.com/html/olympus/dp21-sal/dp21-sal_instructions-manual_4070665054.webp)
51
Cross lines can be displayed on the image center.
1. Select the color and thickness of the lines.
2. Select “
” in the MENU display to display cross lines on the image.
}The cross lines can be displayed either in the live image only or in both
the live and recorded images. For the selection method, see “Scale Display Range Setting (p. 40).”
}The color setting of the cross lines may sometimes not be displayed correctly due to the block noise. Should this be the
case, record images in the TIFF format to display them correctly.
Erase All Files
This function erases all of the measurements results displayed on the screen simultaneously.
Select
to erase all of the measurement results.
Line/text color setup
This function displays the measurement lines and texts (measured val-
ues) in the color specified by the user.
1. In the measurement menu, place the cursor on [LINE].
2. Press the cursor button
of the hand switch D21-HS to open a pull-down menu listing colors. Select the desired color
and press the SET/OK button. If you are using the mouse, click on
and select the color.
}The color of texts can also be specified in the same way.
}The colors of the measurement results drawn in the image cannot be changed. Select the desired color before perform-
ing each measurement.
10
Cross lines display
Color
Thickness
Downloaded from