![background image](http://html2.mh-extra.com/html/olympus/dp21-sal/dp21-sal_instructions-manual_4070665066.webp)
63
When the DP21-SAL is connected to a microscope (BX43, BX53 or BX63) through a control box (U-CBS, etc.), the following
functions interlocked with the microscope are available.
Function
Description
Required units
Auto scale
switching
When the objective in the revolving nosepiece of the microscope is
switched, the displayed scale is automatically switched according to the
newly selected observation magnification.
*
It is necessary to input the magnifications of the objectives in use in
advance. For the input method, see “Auto scale switching (page 67).”
· Control box
(U-CBS/U-CBM/BX3-CBH)
· Revolving nosepiece
(U-D7RES/U-D7REA)
Shutter switch
The camera shutter switch can be installed on the microscope to facilitate
image recording during observation through the microscope.
· Control box
(U-CBS/U-CBM/BX3-CBH)
· Hand switch for exposure
(U-HSEXP)
Guidance
The guidance on the operating procedures of the microscope and cam-
era can be displayed.
· Control box
(U-CBS/U-CBM/BX3-CBH)
D21-CB
U-CBM
U-CBS
U-CBS
BX3-CBH
U-D7REA
U-D7RES
U-HSEXP
U-D7RES
U-D7REA
U-D7RES
U-HSEXP
Control box
Revolving nosepiece/
Hand switch for Exposure
For connection to the U-CBS. (P. 64)
For connection to the U-CBM. (P. 65)
When using the U-D7RES, the U-CBS should
be used.
For details, read the instruction manual for the
U-CBM.
For connection to the BX3-CBH. (P. 65)
}It is also possible to connect the camera to the microscope without using the U-HSEXP. In this case, the shutter switch
function cannot be used.
}It is also possible to connect the camera to the microscope without the U-D7REM/S. In this case, the auto scale switching
function cannot be used.
FUNCTIONS INTERLOCKED WITH MICROSCOPE OPERATIONS
8-1 System chart
Downloaded from