![background image](http://html2.mh-extra.com/html/olympus/dp21-sal/dp21-sal_instructions-manual_4070665047.webp)
44
DP21-SAL
Distance of 2 Points
This function measures the distance between two points specified by the user.
Measurement target
The line connecting @ and ² is
drawn and its length is displayed.
1. When
is selected, pointer “
” is displayed. The pointer can be moved
using the cursor buttons
or the mouse.
2. Press the SHIFT button on each of the points you want to specify (or left-click the
mouse if this is in use). To measure another distance, press the SHIFT button at
each of the points to be specified newly.
3. To end measurement, press the SET/OK button or MENU button (if you are
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
3 Points Circle
This function draws a circle (based on the three points specified by the user) and measures the diameter and area of the
circle.
Measurement target
A circle passing the 3 specified
points is drawn and the diameter
and area of the circle are displayed.
1. When
is selected, pointer “
” is displayed. The pointer can be moved
using the cursor buttons
or the mouse.
2. Press the SHIFT button on each of the points you want to specify (or left-click the
mouse if this is in use). To measure another circle, press the SHIFT button at
each of the points to be specified newly.
3. To end measurement, press the SET/OK button or MENU button (if you are
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
Poly-Line
Measurement target
The point is drawn on the
specified position.
The line passing each of
the newly specified point
and the point specified
before it is drawn, and total
sum of the drawn lines is
displayed.
This function draws lines connecting the multiple points specified on the image and measures the total sum of the
distances of the drawn lines. Up to 100 points can be specified per measurement.
1. When
is selected, pointer “
” is displayed. The pointer can be moved
using the cursor buttons
or the mouse.
2. Press the SHIFT button on each of the points you want to specify (or left-click the
mouse if this is in use). From the second point and on, the line connecting the
point and the previously specified point is drawn.
3. To end measurement, press the SET/OK button or MENU button (if you are
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
Downloaded from