![background image](http://html2.mh-extra.com/html/olympus/dp21-sal/dp21-sal_instructions-manual_4070665006.webp)
3
1
Intended use
This product is intended to be used as an ancillary component for use with Olympus DP21 and DP26 cameras for
capture and storage of digital images, but not for clinical diagnostic purposes
2
Handling Precautions
1. This device is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.
2. If the standalone connection kit DP21-SAL is used in a manner not specified by this manual, the safety of the user may be
imperiled. In addition, the DP21-SAL may also be damaged. Always use the DP21-SAL as outlined in this instruction
manual.
3. Do not use the instruments where they are subjected to direct sunlight, high temperature and humidity, dust or vibrations.
(For the operating conditions, refer to chapter 10, “ SPECIFICATIONS” on page 71.)
4. To prevent malfunction, do not replace modules or connect/disconnect cables while the powers of the devices are set to
ON.
5. The image displayed on the monitor may be affected when it is used near equipment generating strong electromagnetic
waves. To avoid interference during operation, keep the system far from any source of electromagnetic waves.
6. Since we are not responsible for any image data, please be sure to check images, backup or edit the data on your own.
7. If cables are connected incorrectly, the product may malfunction. Be sure that every unit is connected correctly before
operating the product.
3
Maintenance and Storage
1. Do not use organic solvents, which cause painted and plastic parts to deteriorate. Do not use organic solvents to clean
the DP21-SAL components other than the glass components. To clean them, use a lint-free, soft cloth slightly moistened
with a diluted neutral detergent.
2. Do not disassemble this device. Doing so could cause failure of the device.
3. Before disposing of this product, be sure to follow the regulations and rules of your local government.
4. When the system is not used, store it with the dust cover. Before storage, ensure that the power of the control box D21-CB
and the microscope are set to OFF and that the AC adapter and the lamp housing of the microscope are cool enough.
5. When smoking the room for cleaning, etc., move the DP21-SAL to a place not exposed to smoke.
6. Care is required against condensation as this may sometimes cause malfunction. Condensation is the phenomenon in
which the vapor in the air is condensed into water drops, which attach to the surface of a metallic plate, etc. It often occurs
when the ambient temperature changes suddenly, for example when devices are brought from cold outdoors into warm
indoors.
7. Be sure to observe your local regulations and rules when disposing of this product. Special care is required for the control
box D21-CB because it incorporates a lithium ion coin battery (CR2032). If you have any doubt, please consult Olympus.
Downloaded from