![background image](http://html2.mh-extra.com/html/olympus/camedia-c-4040-zoom/camedia-c-4040-zoom_reference-manual_4171187185.webp)
185
Troubleshooting (Cont.)
Chapter 12
POSSIBLE CAUSES
CORRECTIVE ACTION
REF. PAGE
The flash does not fire.
1
The flash is set to the
off mode.
2
The subject is lighted.
3
Sequential shooting is
on.
4
You are recording
movies.
5
Panorama shooting is
performed.
6
FUNCTION is set to
BLACK/WHITE BOARD.
1
Press the
button to select
a flash mode other than
.
2
Set the flash to Fill-In mode.
3
Set DRIVE to
in the
menus.
4
Set the mode dial to any
position other than
.
5
Set PANORAMA to OFF in
the menus.
6
Set FUNCTION to OFF in
the menus.
P. 81–83
P. 81
P. 88
P. 59
P. 98
P. 97
Pictures you have already taken do not appear on the monitor.
1
The camera is in the
shooting mode.
2
There is no picture in
the card.
3
There is a problem with
the card.
4
The camera is
connected to a TV.
1
Set the mode dial to
.
2
NO PICTURE appears on the
monitor. Record pictures.
3
See the error code chart.
4
The monitor does not
function when the camera is
connected to a TV.
P. 116
P. 37, 38,
191
P. 190
P. 133
1
The diopter is not
adjusted properly.
1
Adjust the diopter again.
P. 35
1
The brightness is not
adjusted properly.
2
The monitor is exposed
to direct sunlight.
1
Adjust the brightness.
2
Block the sunlight.
P. 76
The monitor is not clear.
The viewfinder display is not clear.