![background image](http://html2.mh-extra.com/html/olympus/camedia-c-4040-zoom/camedia-c-4040-zoom_reference-manual_4171187172.webp)
172
Transferring images to a computer
— Downloading (Cont.)
Chapter 10
To remove the USB cable, do the following:
Remember:
First remove the card, following the steps on P. 170. Removing
the USB cable is possible even when the card is in the camera, but make
sure that the card access lamp is not blinking.
Windows 98/SE, Mac OS
Make sure the camera’s access lamp is off, then remove the USB cable.
Windows 2000/Me
Do either of the following to remove the USB cable:
Removing the USB cable
(A) Click
on the task bar.
1
Left-click on the “Unplug or Eject Hardware” icon (circled in the illustration
below) on the task bar (at the lower right-hand side of your computer
screen).
2
When a message appears saying that the driver has been stopped, left-
click on the message.
3
When a message appears saying that the hardware can be ejected safely,
click on the “OK” button.
4
Remove the USB cable.
(B) Double-click
on the task bar.
1
Double-click on the “Unplug or Eject Hardware” icon (circled in the
illustration below) on the task bar (displayed at the bottom right on a
personal computer).
2
When the display for ejecting the hardware appears, select the camera
from the hardware device list, then click on the “Stop” button.
3
When a message appears saying that the hardware can be ejected safely,
click on the “OK” button.
4
Remove the USB cable.