49
BX61WI
Fig. 60
Fig. 61
Fig. 62
7
Attaching the Cross Stage
(Figs. 60 & 61)
}When using a WI-XYS bridge stage, attach it by referring to its instruction
manual.
1. Align the two WI-FSH fixed stage adapters
1
with the front of the micro-
scope frameand clamp the adapters by tightening the hex-socket screws
from the bottom side using the Allen wrench provided with the micro-
scope frame.
2. Lower the condenser, align the mounting holes
3
and
5
of the IX-SVL2
cross stage
2
with the mounting screw holes
4
and
6
, and clamp the
cross stage by tightening the hex-socket screws with the Allen wrench
provided with the microscope frame.
}When the waterproof cover is used, attach hex-socket screws to the screw
holes
4
and
6
by passing through the waterproof cover.
Lowering the Stage Height
When no condenser is used, the stage height can be lowered by 50 mm
by loosening the 2 holder clamping screws (
7
in Fig. 60) and removing
the condenser holder.
In this case, however, the length of the WI-FSH fixed stage adapter be-
comes excessive. To deal with this, order custom fabrication of two support
pillars as shown in Fig. 62 or fabricate them by yourself.
1
7
2
3
4
5
6
