Olympus 38DL PLUS Basic Operation Manual Download

Page: 13 / 112

DMTA-10009-01EN [U8778346], Rev. D, November 2016

Important Information — Please Read Before Use

Important Information — Please Read Before Use

Intended Use

The 38DL PLUS instrument has been designed to measure thicknesses of industrial
and commercial materials.

Do not use the 38DL PLUS for any purpose other than its intended use. It must never
be used to inspect or examine human or animal body parts.

Instruction Manual

This instruction manual contains essential information on how to use this Olympus
product safely and effectively. Before using this product, thoroughly review this
instruction manual. Use the product as instructed.

Keep this instruction manual in a safe, accessible location.

WARNING

Summary of Contents for 38DL PLUS

















































































































Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands

Olympus 38DL PLUS, Basic Operation Manual

Search results

Summary of Contents for 38DL PLUS

Reviews:

Related manuals for 38DL PLUS

Brands by name

Popular brands