DMTA-10009-01EN [U8778346], Rev. D, November 2016
Chapter 5
78
If you want to always save both the thickness and the waveform when you press
[SAVE/SEND]
, in the
SYSTEM
screen, set
SAVE DATA
to
THK+WF
.
5.5
Measurements with THRU-COAT D7906 and D7908 Transducers
THRU-COAT is a function that measures the true metal thickness of coated or painted
parts. This function only requires a single back-wall echo and is recommended for
heavy corrosion applications where the outside of the material is coated or painted. If
needed, you can also calibrate the measurement of the coating/paint layer to precisely
measure the thickness of the coating/paint.
5.5.1
Enabling the THRU-COAT Function
The THRU-COAT function is only available when you connect a THRU-COAT
transducer (P/N: D7906 [U8450005] or D7908 [U8450008]) to the 38DL PLUS.
To enable the THRU-COAT function
1.
Connect a THRU-COAT transducer to the 38DL PLUS.
2.
Start the instrument.
3.
Wipe the couplant off the transducer tip.
4.
Press
[2nd F]
,
[CAL ZERO] (Do ZERO)
.
Figure 5
‑
11 Opening the THRU COAT SETUP dialog box
5.
Select
YES
to answer the
Enable THRU COAT?
prompt.
TIP
Summary of Contents for 38DL PLUS
