21
Troubleshooting
Fault Corrective
measures
•
The LED strip does not light up
•
Device does not respond
•
Check that the power switch on
the rear side of the device has
been switched on. Also check that
the On/Off switch on the operating
panel has been switched on.
•
If the fault cannot be cleared,
please contact the sales outlet
where you purchased the device
(refer to Guarantee).
•
Foil jam
•
Check the foil pockets being used
are the correct size.
•
Only use foil pockets of the size
specified.
•
Ensure that the foil pocket is
straight when inserted in the de-
vice.
•
To clear the fault, follow the in-
structions in the Section "Clearing
Foil Jams".
•
Laminated foil is not completely
transparent
•
Laminate the same foil again to
improve the lamination result.
Conformity of the equipment to the
EU directives is confirmed by the
CE mark.
