Page 3 from 22
921316000_09_016
Operation instructions
Thank you for purchasing this product of Olympia Electronics. A European manufacturer.
This section contains general information and information regarding the use of the panel. All users of the panel
should read these instructions very carefully in order to be able to act in the event of an alarm or a fault condition
.
1.1
Description
The BS-316 is a gas detection panel with 16 inputs. On each input it can be connected only one gas detector 4-20
mA.
1.2
Indications and Controls
The panel incorporates one liquid crystal display (LCD) and a series of indication LEDs that informs the user about
its status. The indication LEDs give general information (i.e. if an alarm becomes true, then the general alarm
indicator LED will turned ON.) and on display appears information about each event ( i.e. Alarm sensor 1,that
means alarm from sensor 1) .
Under the display there are 6 buttons for controlling the panel. On each button there is a number 1-6 and
corresponds to the functions left, right, up, down, enter, escape (exit or one step back). Generally by pushing a
button one action happens immediately or one menu appears with some functions. Inside the menu the buttons 1,
2, 3, 4 operate as dimension buttons and we can move inside the menu, the button 5 (enter) to select and button 6
(esc) to come back.
During the next pages we will refer to the buttons using the corresponding numbers.
All LEDs are grouped for easier indication. In detail the LEDs show the following:
General Alarm
(RED)
General Fault
(Yellow)
General alarm indicator
Lights in the event of a
Fault
Disable Point
(Yellow)
Power
(Green)
Lights to show a disabled
inputs
General operation indicator of
the panel
Test
(Yellow)
Fault Battery
(Yellow)
Lights to show that we
are in TEST mode
Lights to show a battery
problem
Figure 1: Main screen of BS-316
