Page 6 from 22
921316000_09_016
Installation instructions
In this section there is information about the connectivity of panel, its peripherals, the programming of all the
functions and troubleshooting. All installers
who want to connect and enable the gas detection panel must read this
manual carefully. The whole knowledge of the panel and its peripherals is necessary for work and installation.
General description
Input peripheral analysis for panel BS-316 :
-
BS-380. LPG detector waterproof IP65.
-
BS-381. Methane gas detector waterproof IP65.
-
BS-382. Carbon monoxide detector waterproof IP65.
-
BS-383. Ammonia detector waterproof IP65.
-
BS-390. LPG detector anti-explosive type.
-
BS-391. Methane gas detector anti-explosive type.
-
BS-393. Ammonia detector anti-explosive type.
On the AUX input we can connect fire detection buttons, like the BS-536, BS-7000 (IP-65).
We can program and work the panel by using only the buttons that are on its keyboard.
Security
The panel cannot be installed correctly if the installation guide is not read.
This product must be installed, operated and maintained by skilled technician:
Using all rules of electrical product installation in buildings.
Installation guide.
- The operation voltage is 220-240V AC / 50-60Hz.
- Must be connected to the electrical panel of the building, but with a separate fuse.
Mounting
The mounting of panel must be in a visible place with easy access by the users. The panel BS-316 is a product for
easy wall mounting and indoor use. The mounting on the wall can be done by using plugs and screws that are
included in the panel package.
