Olsberg Orayonne plus, Instruction Manual

Page: 24 / 84

24
General note
Ž"<*<;Y*\%>;"%—<*Y<<;"#+‚%—<*<*:=Y"<+;"_
If multiple functions are possible, the button will blink for the one that is selected and the value can be changed for. It
is possible to select multiple functions sequentially and to adjust their values without leaving the operation.
During operation, sometimes it is necessary to press multiple buttons after each other in order to get to a menu. To do
this, the buttons must be pressed in short intervals (approx. 1.5 seconds).
Ž";##<;;"\#}Y<<;"><*\%;"<*?%‚"%}Y<<;Y*€+<*\"?#_+?"%<;"€+%%}+<<_%%
<<+"?}Y<¡Y<€+<*"+"+:+Y%<;Y*+"?;=<*?%Y#=>€*#—<*\"?#}Y<%+=<<€"
contact with the glass surface.
By press the button (M), a selected menu can be canceled at any time. Do not accept set values.
q*:+‚#}""<%—¡Y<%+#<+;";=<*<;Y*\%_q*+}"<*<<*":+#;"}"<%;"+<+;"%+
<}‚#<Y#>};+<Y#><_>€*+*}—+"&Y"<*"+<+:+<—;=<*Y<<;">#%"<*#;Y?*<*%+#<+;"_
Nevertheless, should there be any problems during the operation (e.g. button recognition by contact no longer present
;#<;Y*\%‚‚#€+<*;Y<;"<<Š><*:+*;Y%<Y#";==";"_q*:+<<+"?<*<€#%#—
made will remain.
Operation mode HAND
`—<*\#<;}}++;"+"?;=<*?%#+<+;";":<;#><*;"<#;%++"<* †;‚#<+;"};_
Changing between the comfort and lowering modes occurs manually, this means the set operating state is active until
it is manually changed. The set room temperature will appear in the display.
Description Action
Display
q;Y*\%
Comfort mode
With (SUN), you can select the comfort mode and by pressing
(+) or (-), you can adjust the comfort temperature.
The set value is saved automatically.
Factory setting: 20°C
or
Lowering mode
With (MOON), you can select the lowering mode and by pressing
(+) or (-), you can adjust the lowering temperature.
The set value is saved automatically.
Factory setting: 16°C
or
If you would like an automatic change between comfort and lowering mode, you must change to the HOME or OFFICE
operating mode. Should the glass radiation convector be operated in a rarely used room (e.g. weekend house), the
CABIN-mode is recommended.