Olivetti FK-507 Page 23 Service Manual Download

Page: 23 / 118

5. Utility Mode

Field Service Ver. 2.0 Dec. 2008

FK-507

Adjustment / Setting

5.5

Settings in the Admin. (Administrator Management)

• The Admin. setting will be available by entering the administrator password (8 digits) set

by the Admin. setting or Service Mode.
(The administrator password is initially set to “12345678.”)

5.5.1

Document Management

A. TX Forwarding

B. RX Document
(1) All Other Docs.

(2) Network/G3

Functions

• To set to forward received text to a destination that has been set by the administrator.

Use

• When forwarding received text to a destination that has been set by the administrator.

Setting/
Procedure

Touch [Document Management].

Touch [TX Forwarding].

Select the forwarding communication mode, and touch [Next].

Specify the forwarding destination, and touch [Next].

Check the forwarding destination, and touch [OK].

Functions

• Specify the reception method for documents that were received normally.

Use

Setting/
Procedure

Touch [RX Document].

Touch [All Other Docs.].

Touch [Password] and register the password.
New Password: Enter the new password to be used
Confirm New Password: Re-enter the new password

Touch [RX Doc. Settings], then select the desired processing type and touch [OK].

* If [Forward] or [Print & Forward] is selected, set the forwarding destination.

Functions

• A different reception method can be specified for each line.

Use

Setting/
Procedure

Touch [RX Document].

Touch [Network], [G3-1] or [G3-2].

If [YES] is selected for document management, set how the received document is to
be handled.

Touch [Password] and register the password.
New Password: Enter the new password to be used
Confirm New Password: Re-enter the new password

Touch [RX Doc. Settings], then select the desired processing type and touch [OK].

* If [Forward] or [Print & Forward] is selected, set the forwarding destination.

Service Manual Y109

1-7

Summary of Contents for FK-507






















































































































Search results

Summary of Contents for FK-507

Reviews:

Related manuals for FK-507

Brands by name

Popular brands

Olivetti FK-507, Service Manual

Search results

Summary of Contents for FK-507

Reviews:

Related manuals for FK-507

Brands by name

Popular brands