28
/
Press the
|
/
}
keys until the display shows:
CHANGE PATTERN
To confirm your choice. The display shows:
AUTODETECT. RING
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
T
O
CHANGE
THE
LENGTH
OF
THE
ACOUSTIC
SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for
automatic reception
with recognition of the type of call
, it behaves as fol-
lows:
if it is being called by a
fax machine
, it will automatically
prepare to receive a document after the preset number of
rings
if it is being called by a
telephone
, it will emit an
acoustic
signal
for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to receive
a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
FAX/TEL TIMER:20
/
Press
|
/
}
to view the other available values: "15", "30" or
"40". For exemple: "40".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
SILENCE
LAPSE
This function is only enabled in some countries.
Remember that if the
silence lapse
set on the
external
answering machine is shorter
than the one set on the
fax machine, the latter will
never
be able to automatically
prepare to
receive
a document in that the answering ma-
chine is activated first and, if no answering message is
heard within the preset number of seconds,
it closes
the
connection.
At this point, you must
reduce
the
silence lapse
set on
your
fax machine
so that it connects to the line first.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
Until the display shows:
SILENCE LAPSE.: 6
/
Press
|
/
}
to view the other available values: "3", "4", "8",
"10" or "OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
REMOTE
CONTROL
CODE
If the fax machine is connected to an
extension
that oper-
ates in
tone dialling mode
and is set up for
manual
reception
or
automatic reception
with recognition of the
type of call, whenever there is a call from a correspondent
wishing to send you a document, you can
set it to receive
the document by typing the code
* *
on the extension. This
operation has the same effect as pressing the
key on
the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
If the fax machine is connected to an
external answering
machine
, we recommend you choose a different digit from
the one used to control the machine from a remote location.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
The display shows:
PUBL.LINE (PSTN)
