21
Press the
key or press the
key and lift the
handset to listen to message 1 recorded previously. The
display shows:
PLAYING
When it gets to the end of the message, the fax machine
automatically prepares to record a new OUTGOING MES-
SAGE 1. In this case, if you like, you can change or replace
the message recorded previously by repeating the record-
ing procedure.
If the telephone answering device
has no recorded out-
going messages
, the fax machine shows the message
"OGM NOT RECORDED" and automatically prepares to
record one.
To return the fax machine to the initial stand-by mode.
T
O
RECORD
OUTGOING
MESSAGE
2
Record outgoing message 2 as you recorded outgoing message 1,
modifying the second step as follows:
Press the
key and then the
key until the display shows:
RECORD OGM #2
notE
Bear in mind however that you only have 10 seconds.
T
O
LISTEN
TO
OUTGOING
MESSAGE
2
Play back outgoing message 2 as you played back OUTGOING
MESSAGE 1 modifying the second step as follows:
Press the
key and then the
key until the display shows:
PLAY OGM #2
T
O
RECORD
THE
TRANSFER
MESSAGE
Record the transfer message as you recorded outgoing messages 1
and 2 modifying the second step as follows:
Press the
key and then the
key until the display shows:
REC.FORW.ANNOUNC
T
O
RECORD
MEMOS
As mentioned previously, the telephone answering device
may be used to record one or more memos, which are
handled in the same way as incoming messages.
The display shows:
LIFT HANDSET
PRESS
Lift the handset. The display shows:
REC.MEMO MSG?
To start recording. The display shows:
RECORDING 29
or
RECORDING 59
notE
You have
30 or 60 seconds
at your disposal (see "
To set
the length of memos and incoming messages
") to
record your memo in the same way as OUTGOING MES-
SAGES 1 and 2.
T
O
SET
THE
LENGTH
OF
MEMOS
AND
INCOMING
MESSAGES
Until the display shows:
TAD SET-UP
Press the
key and then the
key until the display
shows:
ICM REC.TIME
The display shows:
REC.TIME:30 SECS
/
Press
|
/
}
to view the other available value: "REC.TIME:60
SECS".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
LISTEN
TO
INCOMING
MESSAGES
AND
MEMOS
If there is one or more incoming messages or memos in the
memory of the telephone answering device that have not
yet been played back, the (MESSAGES) LED indicator
blinks and the display shows the total number of messages
recorded (including the memos), for example, 03:
"TAD/FAX RX
03"
"01-08-02 10:32"
At this point, you can listen to all the messages (through the
speaker or the handset), including the memos which are
recorded in the memory and numbered progressively up
to a maximum of 49 starting from the first, which is 01.
